Advertisement
Quick Links
®
Advanced Test Equipment Rentals
www.atecorp.com 800-404-ATEC (2832)
Agilent Technologies
E5346A 38-Pin Probe and
E5351A 38-Pin Adapter Cable
Installation Note
The 38-pin probe and adapter cable provide a convenient way to
connect two Agilent Technologies logic analyzer probe cables to a small
area of a target system. The Agilent Technologies E5346A probe has
RCR isolation networks in the cable end that connects to the 38-pin
AMP MICTOR (Matched Impedance ConnecTOR) connector. The
Agilent Technologies E5351A adapter cable does not have isolation
networks, so isolation networks must be provided on the target system.
1
Advertisement
Related Manuals for Agilent Technologies E5346A
Summary of Contents for Agilent Technologies E5346A
- Page 1 The 38-pin probe and adapter cable provide a convenient way to connect two Agilent Technologies logic analyzer probe cables to a small area of a target system. The Agilent Technologies E5346A probe has RCR isolation networks in the cable end that connects to the 38-pin AMP MICTOR (Matched Impedance ConnecTOR) connector.
-
Page 2: Installation Overview
Installation overview 1 Attach the MICTOR connector(s) to the target system. Use 38- pin surface mount receptacles, AMP part number 2-767004-2. Refer to AMP MICTOR Application Specification 114-11004 for See Also guidelines on soldering. This document can be downloaded from http://connect.amp.com/AMP/docs/pdf/6/95/158596.pdf. - Page 3 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Characteristics The following characteristics apply to the combination of the E5346A 38-pin probe and any compatible Agilent state and timing analysis module (16557D, 16710A, 16711A, 16712A, 16715A, 16716A, 16717A, 16718A, 16719A, 16750A, 16751A, or 16752A).
- Page 4 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Reference • Refer to Agilent publication number 5968-4632E Probing Solutions for Agilent Technologies Logic Analysis Systems for help on the terminations when using the Agilent Technologies E5351A 38-Pin Adapter Cable.
- Page 5 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable 38-pin probe and adapter cable dimensions...
- Page 6 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Notice the holes for mounting the support shrouds in the following illustration. One of the holes is off center to allow 0.40 in. (1.02 mm) centers when using multiple connectors.
- Page 7 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Support shroud dimensions...
- Page 8 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Top view surface mount receptacle Pin 1 and pin 3. Do not use these pins. Pins 5, 7, 9, ... 37. These pins are even numbered logic probe inputs.
- Page 9 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Agilent E5346A Probe and E5351A Adapter Cable Pin Assignments AMP MICTOR-38 Connector Logic Analyzer Pods Signal Name Pin Number J1 (Even Pod) J2 (Odd Pod) CLOCK even D15 even...
- Page 10 Installation Note Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Agilent E5346A Probe and E5351A Adapter Cable Pin Assignments AMP MICTOR-38 Connector Logic Analyzer Pods Signal Name Pin Number J1 (Even Pod) J2 (Odd Pod) GROUND 39-43 All even pins All even pins These pins are +5 volt supply and DC return for analysis probes.
-
Page 11: Safety Notices
• Whenever it is likely that the Agilent Technologies Inc. P.O. Box 2197 1900 Garden of the Gods Road Colorado Springs, CO 80901-2197, U.S.A. - Page 12 WARNING (June 1987). U.S. Government users will receive no greater A WARNING notice than Limited Rights as defined in © Agilent Technologies, Inc. 2001- denotes a hazard. It calls FAR 52.227-14 (June 1987) or 2002 attention to an operating DFAR 252.227-7015 (b)(2)