Foreword General This manual introduces the appearance and basic operations of the handheld thermal temperature monitoring camera (hereinafter referred to as "the Camera"). Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury.
Important Safeguards and Warnings This chapter describes the contents covering proper handling of the Camera, hazard prevention, and prevention of property damage. Read these contents carefully before using the Camera, comply with them when using, and keep it well for future reference. Power Requirements ●...
Page 4
● Do not aim the lenses at intense radiation source (such as sun, laser, and molten steel) to avoid damage to thermal detector and visible lens. ● Prevent liquid from flowing into the Camera to avoid damage to the internal components. In case the liquid entering the Camera, immediately stop using the Camera, cut off the power, and disconnect all the cables.
1 Checking the Package Check the package according to the following checklist. If you find device damage or any loss, contact the after-sales service. Figure 1-1 Package items Table 1-1 Package items Name Name Adapter The Camera Five plugs are provided for Chinese, American, European, Australian, and British standards.
2 Structure 2.1 Dimensions Figure 2-1 Dimensions (mm [inch]) 2.2 Appearance Front Panel Figure 2-2 Front panel...
Page 8
Table 2-1 Front panel description Component Description Display screen Displays live interface and menu interface. ● Press and hold the power button to power on or off the Camera. ● On the live interface, press the power button, and the Camera goes to the standby state; Power button under standby state, press any button to wake up the Camera.
Page 9
Component Description ● Charging: Red light on. ● Full charging: Green light on. The battery can be recharged repeatedly, but it Charging indicator light is a wearable product. If the standby time of the Camera has been greatly reduced, please contact the after-sales support to replace the battery.
3 Basic Operations Interfaces might vary with models and the actual interface shall prevail. 3.1 Live Interface Figure 3-1 Live interface Table 3-1 Live interface Name Recording videos. Temperature unit. Highest temperature spot. Center spot temperature monitoring. Center spot cursor. Recording duration.
3.2 Installing SD Card If you want to store images and recorded videos, you need to purchase and install an SD card first. Step 1 Open the silicone plug on the top of the Camera. Step 2 Face the label side of the SD card to the camera screen, and then insert the SD card slowly until you hear a click sound.
Video playback on the Camera is not supported. To play back the recorded videos, you can copy them to your PC. 3.7 Exporting Images and Recorded Videos You can export images and recorded videos locally. Step 1 On the live interface, press , and the Menu interface is displayed.
● Do not perform any operation during the backup. ● The Camera will be automatically restored to the backup program if the upgrade is failed. 3.9 Auto Maintenance Step 1 On the live interface, press to go to the Menu interface. Step 2 Select System Settings >...
4 Temperature Monitoring Configuration ● Interfaces might vary with models and the actual interface shall prevail. ● The following cases will reduce battery life: Enabling head temperature monitoring, sound alarm linkage, snapshot linkage, and video recording. 4.1 Temperature Settings The Camera supports monitoring the real-time temperature of target objects in different scenarios.
4.2 Temperature Monitoring Settings The Camera supports temperature monitoring. An alarm will be triggered when the temperature of the monitoring target exceeds the alarm threshold. Monitoring method includes Max Temp Point and Head Detection. Step 1 On the live interface, press , and the Menu interface is displayed.
5 System Settings On the live interface, press to go to the Menu interface. Press to select System Settings, and then press , and the System Settings interface is displayed. You can configure USB options, time and date, screen brightness, auto maintenance, restore defaults and restart the Camera.