1. Setting the Time
a. To stop the second hand, wait until second hand is on "0" sec, then pull out
crown to position (2).
b. Turn the crown to set the minute/hour hands to the desired time.
c. To start the second hand, push the crown back to position (0).
2. Setting the Calendar
a. Pull out the crown to position (1).
b. Turn the crown clockwise until the desired day of the week appears.
Turn the crown counterclockwise until the desired date appears.
* Do not set the date and day between 9:00 PM and 4:00 AM otherwise the
date and day may not change properly.
After the time and calendar have been set, be sure to push the crown to the
position (0) and lock it by screwing.
5