Section 2: General Information And Setup; Emissions - Generac Power Systems Trimmer/Mower Owner's Manual

Section 2: General Information and Setup

A
Trimmer/Mower™ Specifications
Cutting Width
Cutting Height
2.75 in (7 cm), 3.25 in (8.26 cm)
Cutting Speed
Cord Size
Wheels
Frame
4 in (41 cm) Diameter, Super-Tough
Mow-Ball®
Drive Belt
Machine
Dimensions (88.9 cm x 56.5 cm x 60.9 cm)
Machine Weight
Handlebar Height
Premium Generac Pro Trimmer Cord
(225-mil Sawtooth Cord, 82' Roll),
Quick-Lock Pre-Cut Cord (155-mil
Accessories
green, 13", 48 Pk), Quick-Lock™ Pre-
Cut Cord (13" Pre-Cut 175-mil, 48 Pk),
DuraBlade® Kit for Trimmer Mower,
Owner's Manual for Trimmer/Mower™
D
C
B
H
Figure 2-1. Features and Controls
22 in (55.88 cm)
Three Position, 2 in (5 cm),
3700 rpm
0.175 in (4.45 mm)
225 mil sawtooth available
16 in (30.64 cm)
14 Gauge Steel
Nylon
V-Belt, 3L440R
35 in x 22.25 in x 24 in
57 lbs (26 kg)
31 in – 49 in
(78.7 cm – 124.5 cm)
TrimSafe Guard Kit
A Handlebar Adjuster
B Oil Fill
C Recoil Starter
D Bail Bar
E
E Fuel Fill
F Fuel Primer
G Quick-Lock™ Trimmer Head
H Trimmer Guard
F
G
Engine Specifications
Engine
Starting Type
Fuel Tank Capacity
Oil Capacity
Oil Type
Spark Plug
Spark Plug Gap
A complete specification sheet is included in the
documentation provided with the unit at the time of
purchase. For additional copies, contact Generac
Customer Service at 1-888-436-3722 (1-888-
GENERAC), or www.generac.com

Emissions

The United States Environmental Protection Agency (US
EPA) (and California Air Resources Board (CARB), for
engines/equipment
requires that this engine/equipment complies with exhaust
and evaporative emissions standards. Locate the emissions
compliance decal on the engine to determine applicable
standards. For emissions warranty information, please ref-
erence the included emissions warranty. It is important to
follow the maintenance specifications in the manual to
ensure that the engine complies with the applicable emis-
sions standards for the duration of the product's life.
General Information and Setup
005826
Generac G-Force
Manual
.21 gal (.8 L)
16.9 oz (.5 L)
Adding Oil
See chart in
TORCH K7RTC or equivalent
.019-.027 in (0.5-0.7 mm)
certified to California
.
standards)
5