Download Print this page

Maintenance And Service; Troubleshooting - DeLonghi DCH 4590 ER Manual

Advertisement

A safety device
A safety device switches the heater off in the event of overheating. To restart the heater, call the
nearest Service center.

5. MAINTENANCE AND SERVICE

Always unplug the heater from the power outlet and allow the radiator to cool. Wipe radiator with
a soft damp cloth; do not use detergents and abrasives. Should the radiator not be in use over a
certain length of time, roll the cable around the holder and store it in a dry place. This appliance
has been built to last for many years of trouble-free service. In case of malfunction or doubt, do
not try to repair the heater by yourself: this might increase the risk of fire and electric shock. Call
nearest Service Center Visit www.delonghi.com for a completelist of Service Centers (U.S.
Only).

TROUBLESHOOTING

PROBLEM
The appliance doesn't work
CAUSE
• Be sure it is plugged in and that
the electrical outlet is working.
• Check for any obstruction.
• The switches are in the OFF posi-
tion.
• The thermostat may be set too
low.
SOLUTION
• Plug into the mains.
• Remove the obstruction. Let
the appliance cool down then
reinsert the plug into the
mains. If the appliance doesn't
work please contact the nearest
service center.
• Switch on the appliance.
• Turn the thermostat to a
higher setting until the heater
restarts.
11

Advertisement

loading