Finishing Up; Security - Tripp Lite B064-000-STN Owner's Manual

Hdmi kvm over ip remote user console station

Hide thumbs Also See for B064-000-STN:

Table of Contents

5. System Configuration

LDAP attribute is required for complete setup. LDAP attribute can be retrieved from the GET command using the Terminal

interface. Refer to section 5.3.5 Terminal for more details.

On the AD/LDAP server, users can be authenticated with any of the following methods:

• With MS Active Directory schema.

• Without schema – Only the Usernames used on the KVM over IP Console Station are matched to the names on the LDAP

server. User privileges are the same as the ones configured on the switch.

• Without schema – Only Groups in AD are matched. User privileges are the ones configured for the groups he belongs to on

the switch.

• Without schema – Usernames and Groups in AD are matched. User privileges are the ones configured for the User and the

Groups the User belongs to on the switch.

Note: For more information on configuring LDAP , you can download the full LDAP instructional manual from our website.

5.2.3.3 Finishing Up

After making any ANMS changes, click "Save" at the bottom of the configuration page.

The Security page is divided into 3 main panels, as described in the sections that follow.

Click "Security" under "Device Management" in the left-hand menu to bring up the information page.

Table of Contents