Chapter 3 Configuration; Configuration - ADT BLUE Camera Hub User Manual

Appendix B - About Wireless LANs
Chapter 3

Configuration

This Chapter provides Setup details of the WiFi extender.
Configuration
The WiFi extender can offer customers with extending wireless communication between
devices and the router wherever at home. This extender is designed to provide reachable
network connection with all certified devices especially for IP cameras, security doorbells and
other WiFi devices.
Configuring WiFi extender via WPS Button
In this case, make sure an existing router. Follow the steps given below.
•
Allocate the extender to a near router or an AP. Power on the extender; plug it into the
wall socket or a power strip. It is recommended to press the WPS button on the extender
within 2 minutes after you have pressed the WPS button on your router or AP.
•
To confirm the pairing process done successfully, check the LAN LED light is fast blink-
ing. Also see the WPS LED light on your router, it will stark blinking.
•
It will take for a while (about 2 minutes) then will get connected to the router. The extend-
er WAN LED light up after successful Internet connection between the two devices.
3
7