Siemens SIMATIC NET ANT795-6MN Compact Operating Instructions page 25

Legal information
Qualified Personnel
The product/system described in this documentation may be operated
only by personnel qualified for the specific task in accordance with
the relevant documentation, in particular its warning notices and safe-
ty instructions. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described
in the catalog and in the relevant technical documentation. If prod-
ucts and components from other manufacturers are used, these
must be recommended or approved by Siemens. Proper transport,
storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safe-
ly and without any problems. The permissible ambient conditions
must be complied with. The information in the relevant documenta-
tion must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG.
The remaining trademarks in this publication may be trademarks
whose use by third parties for their own purposes could violate the
rights of the owner.
Kompaktbetriebsanleitung ANT795-6MN
A5E01116919B-09
English
25