About Charging - Pioneer SDA-835TAB Quick Start Manual

Charging
To charge, plug the supplied USB cable into the tablet's USB connector and
connect to a power source.
USB port
USB cable
To a power source
Correct use of the built-in battery

About charging

• The battery is not fully charged when you purchase this tablet. Please use it
after it is fully charged.
• If the usable time has become extremely short even if the battery is fully
charged, it can be considered that the internal battery has reached the end
of the battery life. In that case, please contact your dealer or an authorized
Pioneer Service Station for assistance.
• The built-in battery is gradually discharging even when it is charged. If the
battery has not been used for a long time after charging, charge it again
the day before use.
• In order to use the built-in battery safely, a protection function may stop
supplying power to the built-in battery or charging the built-in battery at
high or low temperatures.
• If the built-in battery is not fully charged, the tablet may not turn on. In
such a case, connect the USB cable and charge the built-in battery before
use.
7
En