Advertisement
1. Hardware Setup
Step 1. Connect the ADSL line
Connect the RJ-11 (the telephone cable supplied) from the telephone socket to the WAN
port of the router
Step 2. Connect the router to your PC
Connect the router to your PC with an ethernet cable to one of the LAN port of the router.
Step 3. Connect the power adapter to the router
Connect the power adapter to the power jack on the rear panel of router.
Step 4. Check ADSL light status
Please check on the ADSL Led on the front panel of the router. The router will detect the
ADSL-capable telephone line. If the ADSL light is on solid, your broadband is active. However,
if the light is flashing, please call your internet service provider to confirm your broadband
status.
Note: Please use the power adapter provided with the router, do NOT use any other power
adapter from other sources.
2
Edimax Technology (UK) Limited | Quick Installation Guide (AR-7284WnA)
www.edimax.co.uk
Advertisement
