ViewSonic VS13783 User Manual page 25

Installing Driver
1
Make sure the projector is powered off.
2
Connect one end of the bundled USB cable to the USB port of the projector and
the other end to a powered PC.
3
Please switch on the projector and wait until the picture below appears on the
projection screen. Press OK to enter Disk mode.
4
Two removable disks will appear in "My Computer". Please double-click the disk
named DV Projector -> USB driver folder -> Setup.exe program.
5
Click Next to continue.
ViewSonic
Disk
USB Projection
19 DVP5