Starting The Calibration Programme - Miele WWG 660 Operating Instructions Manual

5. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open  and run "Cottons" 90°C without
laundry.
 Touch the  sensor control until the
OK sensor control lights up and
confirm with OK.
 
90° 1400
 
 Open the stopcock.
 Touch the Start/Add laundry sensor
control.
The calibration programme then starts.
It will take approximately 2 hours.
At the end of the programme, the
following message will appear in the
display:

Set up complete
Before using for the first time
 Take hold of the door and pull it
Tip: Leave the door slightly open to
allow the drum to dry.
 Turn the programme selector to the
1:55
OK
open.
 position.
23