Configuring The Password; Setting The Supervisor Password - Samsung P28 Manual

Configuring the Password

■
N
N
1. Select the Security menu in the System Setup. (To enter into System Setup, see
2. On the 'Set Supervisor Password' item, press <Enter>.
3. Enter a password, press <Enter>, re-enter the password for confirmation, and
4. When a message confirming the password configuration appears in the [Setup
Manual
6-4

Setting the Supervisor Password

By configuring a supervisor password, you can restrict system access to autho-
rized users only.
o t e
o t e
Do not lose or forget your password. If you have forgotten your password,
contact the Samsung service center.
Page 6-2.)
Supervisor Password Is Clear
User Password Is Clear
HDD Password Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Set HDD Password [Enter]
Password on Boot [Disabled]
Fixed Disk Boot Sector [Normal]
press <Enter> again.
Notice] window, press <Enter>.
Supervisor Password
controls access to the
setup utility.