Setup Menus; Figure: 10 Setup Menus - ViewSonic PJ500 User Manual

Item
AUTO
BLANK ON/OFF
MENU ON/OFF (*)
MENU SELECT
Use the remote control at a distance of approximately 10 feet (3m) from the sensor on the
NOTE:
front of the projector, and within a range of 30 degrees left/right. Strong light and obstacles will
interfere with operation of the remote control.

Setup Menus

The following menus show adjustments and settings you may use when SETUP is selected at the top
of the menu. Part of the SETUP menu differs between RBG input and video input. Select an item
with the and buttons, and start operation. Use the Single menu to reduce menu size. See
Menu Select in Table 3.
SETUP INPUT IMAGE
BRIGHT
CONTRAST
V POSIT 100
H POSIT 100
H PHASE
H SIZE 800
COLOR BAL R
COLOR BAL B
ASPECT
RGB
Item Actions/Description
BRIGHT
Dark
(Brightness)
CONTRAST
Weak
11 ViewSonic PJ500
Table 3: Basic Operation (Continued)
Description
Automatic Adjustment (for RGB input): Press the AUTO button. Horizontal Position (H.
POSIT), Vertical Position, (V. POSIT), Clock Phase (H. PHASE), and Horizontal Size (H.
SIZE), are automatically adjusted.
• Before using the AUTO feature, be sure to maximize the window of the application
displayed on-screen.
Automatic Adjustment (for Video Input): Press the AUTO button. A signal type appropriate
for the input signal is selected automatically. This is valid only when AUTO is set for VIDEO
on the menu.
• This operation requires approximately ten seconds. It may not function correctly with some
input signals.
Set/ Clear Blank Mode: press the BLANK button. A blank screen (no image) is displayed in
this mode. Access the Image menu to set the screen color for blank mode.
Menu Display Start/Stop: Press the MENU button.
• The menu display is terminated automatically after approximately ten seconds of inactivity.
Select Menu Type: From the Setup menu select a menu item using the
then press the MENU SELECT button on the remote control. A single menu for the selected
item will appear on-screen.
• This is valid only for the Setup menu. Push the MENU SELECT button after selecting an
item such as BRIGHTNESS. A separate Brightness menu will appear on-screen.
OPT. SETUP
0
BRIGHT
-2
CONTRAST
SHAPRNESS
COLOR
+1
TINT
COLOR BAL R
0
COLOR BAL B
0
ASPECT
VIDEO / S-VIDEO
Figure 10: Setup Menus
Table 4: Setup Menu
Light
Strong
INPUT IMAGE OPT.
0
+1
+1
0
0
0
0
RGB Video/
S-Video
X X
X X
SETUP INPUT IMAGE OPT.
BRIGHT
CONTRAST
COLOR
H PHASE
COLOR BAL R
COLOR BAL B
ASPECT
COMPONENT
Component Video
480i/575i/480P 720P/1080i
X
X
buttons,
0
+1
+1
0
0
0
0
X
X