ViewSonic DLP PROJECTOR PJD7400W User Manual page 54

Function
Pre-defined picture modes are provided so you can optimize
Color Mode
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 32
Selects a picture mode that most suits your need for the image
Reference
quality and further fine-tune the image based on the selections
listed on the same page below. See
Mode
mode" on page 33
Adjusts the brightness of the image. See
Brightness
on page 33
Adjusts the degree of difference between dark and light in the
Contrast
image. See
Adjusts the color saturation level -- the amount of each color in a
Color
video image. See
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 34
Tint
Adjusts the image to make it look sharper or softer. See
Sharpness
"Adjusting Sharpness" on page 34
Adjusts white peaking while maintaining correct color
Brilliant
presentation. See
Color
details.
Color
See
Temperature
Save
Saves the settings made for the User 1 or User 2 mode.
Settings
Quick Auto
See
Search
Description
for details.
for details.
"Adjusting Contrast" on page 33
"Adjusting Color" on page 34
The function is only available when Video or S-Video with
NTSC system is selected.
"Adjusting Brilliant Color" on page 34
"Selecting a Color Temperature" on page 34
"Switching input signal" on page 27
49
for details.
"Setting the User 1/User 2
"Adjusting Brightness"
for details.
for details.
for details.
for details.
for details.
for details.
for