ViewSonic PJ1065 User Manual page 13

Items indicated by (*) may be used with the control panel.
Item
VOLUME Volume Adjustment: Press the VOLUME
Set/Clear Mute Mode: Press the MUTE button. No sound is heard in the MUTE
MUTE
mode.
Automatic Adjustment at RGB Input: Press the AUTO button. Horizontal
position(H. POSIT), vertical position (V. POSIT), clock phase (H. PHASE), and
horizontal size(H. SIZE) are automatically adjusted. Use with the window at
maximum size in the application display.
AUTO Automatic Adjustment at Video Input: Press the AUTO button. A signal type
appropriate for the input signal is selected automatically. Valid only when AUTO
is set for VIDEO on the menu.
• This operation requires approximately 10 seconds. It may not function correctly
with some input signals.
BLANK ON/ Set/Clear Blank Mode: Press the BLANK button. No image is displayed in the
OFF Blank mode.
Menu Display Start/Stop: Press the MENU button.
MENU ON/
• The menu display is terminated automatically after approximately 10 seconds
OFF (*)
of inactivity.
Select Menu Type: Press the MENU SELECT button. Allows the user to select
the normal menu or the single menu. Only the selected item is displayed on the
single menu, and other items are displayed with the
the normal menu.
• Valid only when the Setup menu is used. Push the MENU SELECT button after
selecting items such as "BRIGHTNESS".
MENU • The MENU SELECT button may operate as the mouse control button. Refer to
SELECT page 4.
Select Mode of P.IN P. Display: Press the PinP button.
P.IN P.
Small
MODE
• Valid only at RGB IN 1, RGB IN 2 or DVI input.
Adjust Screen Size: Press the ZOOM
ZOOM (*)
Adjust Focus: Press the FOCUS
FOCUS (*)
Set / Clear KEYSTONE Mode: Press the KEYSTONE
KEYSTONE Select KEYSTONE Mode: Press the
(*) Vertical
Adjust KEYSTONE: Press the
Table 3: Basic Operation (continued)
Normal menu
(MENU SELECT)
Large P.IN P. off (
Horizontal
Description
Small)
button.
button in the KEYSTONE mode.
button.
button.
and buttons as with
Single menu
button.
button.
ViewSonic PJ1065 11