Related Manuals for Shure RK244G
Summary of Contents for Shure RK244G
- Page 1 RK244G RK244G Replacement Screen and Grille Online user guide for the Shure RK244G replacement screen and grille assembly for the Model SM57 microphone. Version: 2.0 (2020-G)
- Page 2 Shure Incorporated Table of Contents RK244GRK244G Replacement Screen and Grille Removal General Description Installation...
-
Page 3: General Description
RK244G RK244G Replacement Screen and Grille General Description The Shure RK244G is a replacement screen and grille assembly for the Model SM57 microphone. The RK244G consists of the complete screen and grille assembly, an extra retainer ring, and nameplate. Removal CAUTION: Use extreme care in removing the screen and grille assembly. -
Page 4: Installation
Shure Incorporated Peel the old nameplate off and discard it. Rotate the grille assembly until the two metal tabs are centered above one of the recessed flat areas (visible through the perforated collar). Refer to the exploded diagram above. Use a small (1/16 in. blade maximum) screwdriver to depress the two metal tabs while you lift the grille up and over the metal tabs. - Page 5 Shure Incorporated If you have a Shure microphone that requires a different nameplate (SM77, PE65, PE66, 545, etc.), please contact Shure’s Service Department.