ViewSonic VX2000 User Manual page 9

Do the following to adjust the screen image:
To display the Main Menu, press button [1].
1
All OnView menus and adjustment screens disappear automatically
NOTE:
after about 15 seconds. This is adjustable through the OSD timeout setting in the
setup menu.
To select a control you want to adjust, press
2
Main Menu.
After the control is selected, press button [2]. A control screen like the one
3
shown below appears.
To adjust the control, press the up
4
To save the adjustments and exit the menu, press button [1] twice.
5
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1600 x
1200 @ 60Hz to the LCD display. (Look for instructions on "changing the
refresh rate" in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated "active area" of the
LCD display.)
▲ ▼
or to scroll up or down the
The command line at the
bottom of the control screen
tells what to do next from this
screen. You can toggle
between control screens,
adjust the selected option, or
exit the screen.
▲ ▼
or down buttons.
ViewSonic
8
VX2000