ViewSonic VS13510 User Manual page 39

HEAT STATUS
* : D i s c l a m e r : H e a t s e n s o r i s i n d i c a t i v e .
HEAT STATUS allows you to watch the thermal status at any time via the OSD menu and/or via
RS232C commands. The indicated temperature has a accuracy of 3 degrees (plus and minus).
Press "ENTER" button to enter the submenu to monitor the heat status.
Press "EXIT" button to cancel and then return the previous menu.
DATE AND TIME
Adjusts the current date and time for internal clock.
You should set this function when you use "SCHEDULE".
SCHEDULE
Programs the monitor's working schedule.
Schedules the power on and power off by using hour and a day of the week. Also sets the input
port.
This OSD can't be removed except EXIT.
MONITOR ID
ID numbers for remote control are assigned to monitors that are multi-connected via RS232C.
ID numbers 1 to 26 are selectable.
DDC/CI
Use to turn ON or OFF the DDC/CI communication function. Select ON for normal use.
ADVANCED OPTION RESET
Selecting ADVANCED OPTION RESET allows you to reset all OSD settings from ADVANCED
OPTION settings, except for GAMMA SELECTION, DATE AND TIME, SCHEDULE, HDMI
INPUT MODE, DVI-D INPUT MODE,MONITOR ID, and DDC/CI.
Select "YES" and press "ENTER" button to restore the factory preset data.
Press "EXIT" button to cancel and then return the previous menu.
GAMMA SELECTION is reset when carrying out the PICTURE RESET in the PICTURE.
37
ViewSonic CD4233