Other Information Specifications ... 14 Troubleshooting... 15 Customer Support ... 16 Cleaning the LCD Display ... 17 Limited Warranty ... 18 Appendix Safety Guidelines ... 19 Compliance Information for U.S.A... 20 CE Conformity for Europe ... 20 07/01/04 ViewSonic VP2000s...
NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this mate- rial, or the performance or use of this product.
NOTE: User Guide PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both files. Precautions • Sit at least 18" from your LCD display.
NOTE: Windows users may receive a message asking them to install the INF file. This is on the CD. 4 Insert the ViewSonic Wizard CD into the computer’s CD drive. Follow the on-screen instructions. If your computer does not have a CD-ROM drive, see “Customer Support.”...
Portrait software included with your LCD display. Perfect Portrait software is compatible with most PCI and AGP graphics (video) cards. For information about compatible graphics cards and approved hardware configurations, go to the ViewSonic website, http:// Portrait www.viewsonic.com ViewSonic VP2000s...
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:...
LCD display’s power will automatically turn ON when power is restored. Power Button Unlock: Press and hold [1] and the down arrow seconds. ® ▲ for 10 seconds. If any ▲ again for 10 seconds. ▼ for 10 ▼ again for 10 ViewSonic VP2000s controls...
Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Also a shortcut to toggle analog and digital connection. Power light Green = ON Orange = Power ViewSonic VP2000s ® Saving Power On/Off...
Page 10
(The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD display.) ▲ ▼ to scroll up or down the ▲ ▼ or down buttons. ViewSonic VP2000s...
6500K — Adds red to the screen image for warmer white and richer red. automatically sizes, centers, and fine tunes adjusts background black level of the screen image. allows you to toggle between an analog and a provides several color adjustment modes: preset ViewSonic ▲ ▼ and down buttons. VP2000s...
Page 12
(video signal input) displays the Manual Image Adjust menu. controls are explained below: moves the screen image left or right. moves the screen image up or down. adjusts the width of the screen image. ViewSonic ▼ VP2000s...
Page 13
Resolution Notice menu shown advises the optimal resolution to use. If multiple computers will be connected to the display, ViewSonic VP2000s...
Page 14
Exception: This control does not affect changes made with the User Color control. allows you to move the on-screen display menus sets the length of time an on-screen display allows you to turn the On-Screen-Display returns adjustments to the original factory ViewSonic VP2000s...
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display. Macintosh computers older than G3 require a ViewSonic contact ViewSonic. 20.1" (full 20.1" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix XGA LCD, 0.255 mm pixel pitch...
Loose or broken pins in the cable connector could cause an improper connection. • Connect the LCD display to another computer. • If you have an older graphics card, contact ViewSonic for a non-DDC adapter. Control buttons do not work •...
LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product. Switzerland ... SEV Britain ... BASE/BS Japan ... Electric Appliance Control Act Figure A2 Maximum Current Rating of Unit 10 Amps 12 Amps 12 Amps 10 Amps 12 Amps ViewSonic VP2000s...
CE Conformity for Europe The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” ViewSonic VP2000s...