Canon EOS R5 Advanced User's Manual page 647

12.
Select [Auto send].
Once [Enable] is set, images are automatically sent when you turn the
camera on.
13.
Select [Type to send].
Set to [Stills only] or [Stills+movies].
14.
Restart the camera.
The images are now sent automatically.
To switch networks, select [Switch network] and follow steps 5–8.
To remove the connection, select [Clear camera web link settings] and then [OK].
Note
All image files on cards are sent when [Auto send] is set to [Enable].
When [Auto send] is set to [Enable], auto send starts after the camera starts up
(or recovers from auto power off).
Any images captured during auto sending are also sent.
647