Dell G7 7700 Service Manual page 79

Table 3. System setup options(continued)
Overview
Intel Hyper-Threading Capable
64-Bit Technology
MEMORY
Memory Installed
Memory Available
Memory Speed
Memory Channel Mode
Memory Technology
DIMM A Size
DIMM B Size
DEVICES
Panel Type
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth Device
Primary Hard Drive
LOM MAC Address
Pass Through MAC Address
Cellular Device
Slot
Table 4. System setup options—Boot Configuration menu
Boot Configuration
Boot Mode
Boot Mode: UEFI only
Boot Sequence
Advanced Boot Options
Enable UEFI Network Stack
UEFI Boot Path Security
Expert Key Management
Enable Custom Mode
Displays whether the processor is Hyper-Threading (HT) capable.
Displays whether 64-bit technology is used.
Displays the total computer memory installed.
Displays the total computer memory available.
Displays the memory speed.
Displays single or dual channel mode.
Displays the technology that is used for the memory.
Displays the memory size in DIMM Slot A.
Displays the memory size in DIMM Slot B.
Displays the panel type of the computer.
Displays the integrate graphics information of the computer.
Displays the video memory information of the computer.
Displays the Wi-Fi device installed in the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays whether a Bluetooth device is installed in the computer.
Displays the primary hard drive in the computer.
Displays the MAC address.
Displays the MAC address of the video pass-through.
Displays the cellular device information.
Displays the information of the device installed.
Displays the boot mode of this computer.
Displays the boot sequence.
Enables or disables UEFI Network Stack.
Default: ON
Enables or disables the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu.
Default: Always Except Internal HDD
Enables or disables the PK, KEK, db, and dbx security key databases to be
manipulated.
Default: OFF
System setup 79