Advertisement
Quick Links
FLIK
INSTRUCTION MANUAL -
AUTOMATION FOR SLIDING WINDOWS AND
EN
DOORS
Force 100N (230V) / 120N (24V) – Maximum door/sash weight 400 Kg
Electrical supply:
█ 110÷230V~ 50/60Hz,
NEKOS
S.r.l. - Via Capitoni, 7/5 - 36064 Colceresa (VI) – ITALY
+39 0424 411011 – +39 0424 411013 - www.nekos.it - info@nekos.it
4420079 - Rev. 1 of 5/2020
TRANSLATION OF ORIGINAL INSTRUCTIONS
█ 24V
Nekos products have been manufactured in accordance with safety standards and conforms to
products have been manufactured in accordance with safety standards and conforms to
products have been manufactured in accordance with safety standards and conforms to
the stipulations of current standards in force.
the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they will not
When correctly assembled, installed and used according to the present instructions, they will not
When correctly assembled, installed and used according to the present instructions, they will not
generate any danger for persons, animals or items.
generate any danger for persons, animals or items.
Symbols used in the manual
Symbols used in the manual
This indication highlights potential hazards for the safety and
This indication highlights potential hazards for the safety and
This indication highlights potential hazards for the safety and
CAUTION
health of humans and animals.
health of humans and animals.
INFORMATION
Information providing further suggestions.
Information providing further suggestions.
This indication highlights potential damage to property or to the
This indication highlights potential damage to property or to the
This indication highlights potential damage to property or to the
WARNING
product and its correct use.
product and its correct use.
CONTENTS
G
..........................................................................................
................................
ENERAL INFORMATION
U
................................
..............................................................................................
SER INSTRUCTIONS
I
................................................................
................................
NSTALLER INSTRUCTIONS
1.
Safety standards ................................
................................................................................................
2.
Field of application ................................
................................................................................................
3.
Technical operating information
Technical operating information ................................................................
4.
Manufacture and regulatory framework
Manufacture and regulatory framework ................................................................
5.
Nameplate data and marking ................................................................
Nameplate data and marking
Technical data ................................
................................................................................................
6.
Electrical power supply ................................
.........................................................................................
7.
Choice of power cable diameter ................................................................
Choice of power cable diameter
7.1.
Risk analysis ................................
................................................................................................
8.
Installation instructions ................................
..........................................................................................
9.
Fitting the rack ................................
..........................................................................................
9.1.
9.2.
Mounting the gearmotor on the frame
Mounting the gearmotor on the frame ................................
9.2.1. Preparing for mounting
mounting ................................................................
9.2.2. Preparation and mounting of the gearmotor
Preparation and mounting of the gearmotor ................................
10. Electrical connection ................................
...........................................................................................
10.1. Machine electrical connections
Machine electrical connections ................................................................
10.2. Connection with a K
Connection with a K-LOCK electromechanical lock ................................
11. Programming and resetting the gearmotor
Programming and resetting the gearmotor ..........................................................
11.1. Stroke end position
setting procedure ................................
11.2. Troubleshooting ................................
................................................................
12. Checking correct installation
correct installation ................................................................
13. Emergency and maintenance manoeuvres
Emergency and maintenance manoeuvres - Release device ..............................
14. Disposal and environmental protection
Disposal and environmental protection ...............................................................
15. Reminder of the Warranty conditions
Reminder of the Warranty conditions ................................................................
16. Declaration of Incorporation and
Declaration of Incorporation and
.......................... 3
.............................. 3
...................................................... 4
................................... 4
................................ 5
........................................... 5
................................ 5
............................................... 6
...................................... 6
......................... 7
................................. 7
........................................ 7
.......................... 8
.......................... 8
........................................................ 9
.......................................... 9
......................................... 10
........................... 11
................................ 11
................................... 12
.......................... 12
...................................................... 12
...................................................... 14
............................................... 14
.............................. 14
............................... 15
................................. 15
Conformity ................................
.................................................. 16
2
Advertisement
Summary of Contents for nekos FLIK
- Page 1 Nekos products have been manufactured in accordance with safety standards and conforms to products have been manufactured in accordance with safety standards and conforms to products have been manufactured in accordance with safety standards and conforms to the stipulations of current standards in force.
- Page 2 INSTALLER INSTRUCTIONS INSTALLER INSTRUCTIONS Carefully read this instruction manual for installation and use before putting the FLIK Carefully read this instruction manual for installation and use before putting the FLIK Carefully read this instruction manual for installation and use before putting the FLIK SECURITY RULES sliding system into operation;...
- Page 3 The gearmotor is individually packaged in a cardboard box. Each package contains: An electric gearmotor complete with power cable; The FLIK system is installed on the interior side of the upper part of the frame, and is used Instruction manual;...
- Page 4 ELECTRICAL POWER SUPPLY INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS The FLIK system is powered with a voltage of: These guidelines are intended for technical and These guidelines are intended for technical and specialised personnel; therefore, no specialised personnel; therefore, no comments are made on basic work and safety methods.
- Page 5 PVC door/sash Wooden door/sash Aluminium door/sash The screws for fixing the bracket to the gearmotor are supplied (M5x14 metric flat head screws) and the bracket should be assembled on the gearmotor in the exact position shown in the figures above, depending on how the gearmotor is mounted on the door/sash (to the right or to the left).
- Page 6 (the terminal is terminal of an appropriate size (the terminal is One FLIK plus one lock, One FLIK plus one lock, supplied). Two FLIKs connected and synchronis...
- Page 7 13. EMERGENCY AND MAINTENANCE MANOEUVRES – Release device be repeated. NOTE The FLIK gearmotor can be equipped with a release device for the drive mechanism; as this is an accessory mechanism, if it is not installed, it should be...
- Page 8 The purchaser is not entitled to any reimbursement for eventual direct or indirect damage or other expenses incurred. Attempt to repair by personnel unauthorised by the manufacture shall render NEKOS SRL - Via Capitoni 7/5 - 36064 Colceresa (Vicenza) - Italy the warranty null and invalid.