Page 2
REMOTE START OWNER’S GUIDE REMOTE START OWNER’S GUIDE INTRODUCTION Congratulations on your purchase of a Remote Start system. This easy-to-use manual details the operation instructions and benefits of the Remote Start System. Should you have questions regarding this system that this manual does not address, please contact your local dealer.
Using The Remote Control Remote Starting your Vehicle Remote Starting Description of Remote Start Fob Using Remote Start Fob 1. Press button 1 time, the lock icon will display. Within 3 seconds, press and hold the button for 2 seconds, Lock, Unlock and Remote the key icon will flash and the vehicle will start.
Remote Start Features Remote Start Features Remote Start Error Diagnostic Valet/Service Mode If remote engine start fails, the vehicle will not start and the horn will sound the corresponding number of times to identify the Valet/Service mode is used to prevent the system from unexpectedly starting the engine while being serviced. reason for the failed remote start listed below;...
Page 5
Pairing Remote Start Fob Battery Replacement for Remote Start Fob The two (2) 3-Volt Lithium battery (Model: CR2025) supplied in your remote control transmitter will last approximately 3 years, Pairing Remote Start Fob depending on usage. When the batteries begin to weaken, the Remote Start Fob LEDs will no longer flash per operation and the The Remote Start Fobs in the Remote Start Kit are paired with the main module at the time of production.
Remote Start Run Time Troubleshooting Poor Transmitting Range Many factors may affect the operating range of the transmitter. Some of these are: The remote start system is preset to the 10 Minutes (default) runtime setting and can not be increased. The standard runtime can be stopped at anytime using the remote start fob or factory transmitter.