Jack
The jack is located in tool box A under the load-
space floor.
f Please observe the chapter "OPENING LOADS-
PACE FLOOR" on Page 182.
Warning!
The jack must be used only to raise the car
WWW.MANUALS.WS
for wheel changing.
The jack must never be used as a support to
work underneath the vehicle. If the jack is ac-
cidentally dislodged, you or bystanders could
suffer severe personal injury.
f Never jack up other vehicle or other loads with
the jack.
f Always place the car on stable supports if you
have to work under the car.
When working under the vehicle, always use
safety stands specifically designed for this pur-
pose.
WWW.MANUALS.WS
Tool Kit
Tool box A and compressor B with pressure tester
on non-air suspension vehicles are located under
the cargo area.
Notes on operation
The screwdriver is located in the handle of the
wheel bolt wrench.
Practical Tips, Minor Repairs
283