Removing & Installing Body Components
Battery
Battery band
Battery
Positive terminal
Negative terminal
#
Removal
Make sure the ignition switch is in the OFF
position.
Remove the left side cover.
1.
Remove the battery band.
2.
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first.
Make sure that bolts and nuts are tight.
Make sure the clock information is correct after
the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
P. 64
2
P. 25
2
P. 49
2
P. 104
59