Power Management - Dell Latitude 3300 Setup And Specifications Manual

Hide thumbs Also See for Latitude 3300:
Table of Contents

Advertisement

Available languages

Available languages

Option
C-States Control
Hyper-Thread Control

Power management

Table 30. Power Management
Option
AC Behavior
Enable Intel Speed Shift
technology
Auto On Time
USB Wake Support
Wireless Radio Control
Wake on LAN /WLAN
Description
Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Wake on AC
This option is not set by default.
This option is used to enable/disable Intel Speed Shift Technology.
This option is not enabled by default.
Allows you to set the time at which the computer must turn on automatically.
The options are:
Disabled—Default
Every Day
Weekdays
Select Days
This option is not set by default.
Allows you to enable USB devices to wake the system from standby.
Enable USB Wake Support
Wake on Dell USB-C Dock—Default
This option if enabled, will sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection from the wired network
the selected wireless radio will be enabled.
Control WLAN radio
This option is not set by default.
This option allows the computer to power up from the off state when triggered by a special LAN signal.
Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating
system. This feature only works when the computer is connected to AC power supply.
Disabled—Default - Does not allow the system to power on by special LAN signals when it receives
a wake-up signal from the LAN or wireless LAN.
LAN or WLAN - Allows the system to be powered on by special LAN or WLAN signals.
LAN Only - Allows the system to be powered on by special LAN signals.
WLAN Only - Allows the system to be powered on by special WLAN signals.
LAN with PXE Boot A wake up packet is sent to the system in either the S4 or S5
Description
Allows you to enable or disable the additional processor sleep
states.
C states
This option is set by default.
Allows you to enable or disable the HyperThreading in the
processor.
Disabled
Enabled—Default
Nastavenie systému
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

P95g

Table of Contents