Page 1
I-Beam Table Base Assembly Instructions 2 left legs in one carton, 2 right legs in one carton, 2 side supports in one carton, & 2 center supports in one carton.* *Bases for 36 x 36" tops only have one center support.
Page 2
Attach side supports to legs using bolts packed in red bag located in side support cartons. The flat side with the holes (c) goes up. Connect two center supports together.* The flat side with the holes (c) goes up. Then attach center support to the side supports. The bolts are packed in a red bag located in the center support carton.