Advertisement
Assembling
Adjust the stand to any position desired by loosening the clamp knobs or bolts and rotating the fittings. Be
sure to re-tighten the clamp knobs and bolts when you achieve the setup you want.
If you use the Cymbal Mount MDY-7U (optional), attach the MDY-7Us to the front tube before you
assemble the MDS-8.
Slight modifications may have been made in the parts making up the Drum Stand, so the illustration
may not provide an exact depiction.
MDY-7U
(optional)
Contents
Owner's Manual (this manual)
Adjusting Tool
Cable Ties
Detach
Cable Tie Roll
Cable Tie
Pipe
Cable
MDY-7U
(optional)
3
Advertisement
