Table of Contents
Advertisement
Altering or deactivating the
charcoal filter operating hours
counter
You can set the operating hours counter
to suit the type of cooking you do.
The factory default setting is a reactiva-
tion interval of 180 hours.
Switch off the fan and the lighting.
Press the control and the operating
hours control at the same time.
The charcoal filter symbol and one of
the fan power levels will flash.
Fan power level indicators 1 to B show
the time set:
Indicator 1 ............................. 120 hours
Indicator 2 ............................. 180 hours
Indicator 3 ............................. 240 hours
Indicator B .......................... deactivated
Select the duration you want with
the or control.
Confirm your choice with the operat-
ing hours control .
All the indicator lights will go out.
If you do not confirm your selection
within 4 minutes, the cooker hood will
automatically revert to the original set-
ting.
Changing settings
Deactivating power manage-
ment
Keep in mind that deactivating this
function may increase energy con-
sumption.
Activating/deactivating Power Man-
agement
Switch off the fan and the lighting.
Press the fan run-on control for
approx. 10 seconds until the indicator
for fan power level 1 lights up.
Then press in turn:
– the lighting control ,
– the button, and then
– the lighting control .
If Power Management is activated, the
1 and B indicators light up constantly.
When it is deactivated, the 1 and B in-
dicators flash.
Press the control to deactivate
Power Management.
The 1 and B indicators will flash.
Press the control to activate Power
Management.
The 1 and B indicators will light up con-
stantly.
Confirm the setting with the run-on
option control .
All the indicator lights will go out.
If you do not confirm your choice of set-
ting within 4 minutes, the cooker hood
will revert to the old setting.
29
Advertisement
Table of Contents
