Pulse LSM2141 Operation Instruction Manual page 9

Operation Instruction
3. System submenu
Push "MENU" button, select Security Submenu by "BACK" "NEXT", "ENTER"
System submenu includes as below:
Input option: set inputAI input B to link control or not
Wake up time: set system turn on status
Fade-in: Volume rise to memory model slowly
Mute hold: set all channels on mute.
4. Interface submenu
Interface submenu include: USB baud rate and address code setting. Band rate
fixed as 38400 Remote ID Number fixed as 1
5. Parameter
Push "Gain" to enter setup menu, push "Back" "Next" to switch menu.
A. Input gain: Input A, Input B, Gain adjust range is -40.0dB-+6.0dB, step in +0.5dB.
Rotate "Param" to adjust Gain value.
B. Output gain: Op1 ...... 0p6. Gain range: -40.0dB - +6.0dB, step in +0.5dB, Rotate
"Param" to adjust Gain value.
C. Output phase: Polarity, [+], [-]. Each channel include separate phase control, Rotate
"Param" to adjust phase.
D. Delay: each channel include separate delay control, adjustment range from Oms-7ms,
step in+21 uso Rotate "Param" to adjust delay time, show three units simultaneously.
6
MA I N MENU .... . . . . .... .
System Sub-Menu
InputA Gain
Gain=O.OdB
Op1 low Gain
Gain=O.OdB
Op1 low Gain
Polarity=[+]
Op1 LOW Delay
Delay=O.Oms