JVC KD-R890BT Instruction Manual page 33

TROUBLESHOOTING
Symptom
"UNRESPONSIVE DEVICE" Make sure the device is not malfunction and reattach
appears. the device.
"USB HUB IS NOT This unit cannot support a USB device connected via a
SUPPORTED" appears. USB hub.
"CANNOT PLAY" appears Connect a USB device that contains playable audio files.
• The source does not The USB port is drawing more power than the design
change to "USB" when limit. Turn the power off and unplug the USB device.
you connect a USB device Then, turn on the power and reattach the USB device. If
while listening to another this does not solve the problem, turn the power off and
source. on (or reset the unit) before replacing with another USB
• "USB ERROR" appears device.
• Check the connection between this unit and iPod/
The iPod/iPhone does not
turn on or does not work. iPhone.
• Disconnect and reset the iPod/iPhone using hard reset.
"LOADING" appears when This unit is still preparing the iPod/iPhone music list. It
you enter search mode by may take some time to load, try again later.
pressing .
Correct characters are not • This unit can only display uppercase letters, numbers,
displayed. and a limited number of symbols.
• Depending on the display language you have selected
( 5), some characters may not be displayed correctly.
• Sound cannot be heard • Reconnect the Android device.
during playback. • If in [AUDIO MODE], launch any media player
• Sound output only from application on the Android device and start playback.
the Android device. • If in [AUDIO MODE], relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal to
unit. ( 27)
Remedy Symptom Remedy
Cannot playback at • Make sure JVC MUSIC PLAY APP is installed on the
[AUTO MODE]. Android device. ( 7)
• Reconnect the Android device and select the
appropriate control mode. ( 8)
• If this does not solve the problem, the connected
Android device does not support [AUTO MODE].
( 27)
"NO DEVICE" or "READING" • Switch off the developer options on the Android device.
keeps flashing. • Reconnect the Android device.
• If this does not solve the problem, the connected
Android device does not support [AUTO MODE].
( 27)
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
"CANNOT PLAY" • Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
"ADD ERROR" New station creation is unsuccessful.
"CHK DEVICE" Check the Pandora application on your device.
"NO SKIPS" The skip limit has been reached.
"NO STATIONS" No stations are found.
"STATION LMT" The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your
device.
"UPGRADE APP" Make sure you have installed the latest version of the
Pandora application on your device.
29
ENGLISH