Table of Contents
Advertisement
This unit is not waterproof.
Protect this unit from being splashed with
water. (Especially when shooting in the rain)
Protect this unit from getting wet when
shooting on a beach. In addition, salt and sand
may adhere to the body. Be sure to clean the
unit after use.
Transportation
Do not drop or hit this unit against a hard
object when transporting.
Maintenance
Turn off the power before performing any
maintenance.
Wipe the external cabinet of the unit with a
soft cloth. Do not wipe the body with benzene
or thinner. Doing so may cause the surface to
melt or turn cloudy. When it is extremely dirty,
soak the cloth in a solution of neutral
detergent, wipe the body with it, and then use
a clean cloth to remove the detergent.
SDHC/SDXC Card
SDHC/SDXC card is referred to as "SD
card" in this manual.
If the SD card contains files recorded by
devices other than this unit or files that are
saved from a PC, the recording time may be
shorter or data may not be properly recorded.
In addition, the remaining space on the card
may not increase even when files are deleted
using a PC.
Handling of SD Cards
Do not remove the SD card during data
access (such as recording or playback.
Do not turn off the power or remove the
power cord during access either.
Do not use or store the SD card in a place
that is subject to static electricity or electrical
noise.
Do not place the SD card near locations
that are exposed to strong magnetic fields or
radio waves.
Inserting the SD card incorrectly may
result in damage of this unit or the SD card.
■
AltaSens is not liable for any accidental
We are not liable for any accidental loss of
loss of data stored on the SD card. Please
data stored on the SD card. Please back up
any important data.
back up any important data.
s
.)
Make use of the SD card within the
prescribed conditions of use.
Do not use it at the following locations:
Places that are subject to direct sunlight, high
humidity or corrosion, places near thermal
equipment, sandy or dusty places, or in a car
under the sun with the doors and windows
closed.
Do not bend or drop the SD card, or subject
it to strong impact or vibration.
Do not splash the SD card with water.
Do not dismantle or modify the SD card.
Do not touch the terminals with your hands
or with a metal object.
Do not allow dust, dirt, water, or foreign
objects to adhere to the terminals.
Do not remove the labels or stick other
labels or stickers on the SD cards.
Do not use pencils or ballpoint pens to write
on the SD cards. Always use oil-based pens.
If you format (initialize) the SD card, all data
recorded on the card, including video data and
setup files, will be deleted.
The SD card may be damaged if the unit is
not operated correctly. Formatting (Initializing)
the SD card may allow it to operate correctly.
If you want to wipe out all information by
completely erasing the data, we recommend
either using commercially available software
that is specially designed for that purpose, or
by physically destroying the SD card with a
hammer, etc. When formatting or erasing data
using the unit, only the file administration
information is changed. The data is not
completely erased from the SD card.
Some commercially available SD cards may
be harder to be removed from this unit.
Remove them by hooking onto the groove on
the cards.
It will be easier to remove the cards after
several times.
Do not stick any stickers on the cards.
The SD card may pop out when it is being
removed. Be careful not to lose the card.
7
11
Groove
Advertisement
Table of Contents
