Table of Contents
Advertisement
PictBridge : RESET
Initializes user-changed configurations.
1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.86)
2. Use the LEFT and RIGHT buttons to select the [RESET]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
- If [YES] is selected
- If [NO] is selected
Default print setting varies depending on the printer manufacturer.
For your printer's default setting, refer to the user's guide that came with your printer.
: All print and image settings will be
reset.
: Settings will not be reset.
RESET
YES
NO
MOVE:
SET:OK
77
Advertisement
Table of Contents
