Yamaha YZF-R6 Owner's Manual page 50

Instrument and control functions
With the engine turned off:
1. Move the sidestand down.
2. Set engine stop switch to run position.
3. Turn main switch to on position.
4. Shift transmission into neutral.
5. Push the start switch.
Does the engine start?
YES
4
With the engine still running:
6. Move the sidestand up.
7. Pull the clutch lever.
8. Shift transmission into gear.
9. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
10. Move the sidestand up.
11. Pull the clutch lever.
12. Push the start switch.
Does the engine start?
YES
The system is OK. The motorcycle can
be ridden.
If a malfunction is found, have the
vehicle inspected before riding.
The neutral switch may not be working.
NO
The motorcycle should not be ridden
until checked by a Yamaha dealer.
The sidestand switch may not be
working.
NO
The motorcycle should not be ridden
until checked by a Yamaha dealer.
The clutch switch may not be working.
NO
The motorcycle should not be ridden
until checked by a Yamaha dealer.
4-32
WARNING