Replacement Parts; Technical Service; Nailing Flanges - Vanguard LogMate FB32CA Owner's Manual

INSTALLATION
Continued
2. Install gas piping to firebox location. This
installation includes an approved flexible
gas line (if allowed by local codes) after the
manual shutoff valve. The flexible gas line
must be the last item installed on the gas pip-
ing. See Connecting to Gas Supply in log set
ownerʼs manual.
3. Carefully set firebox in front of rough open-
ing with back of firebox inside wall opening.
IMPORTANT: If installing Brass Trim Kit
GA6090, see instructions included with brass
trim accessory. You must install shoulder
screws now.
4. If using GA3700 blower accessory (Models
FB32CA and NLFB32C only), see Installing
Blower Accessory for built-in installation,
page 11.
5. Attach flexible gas line to log set. See Con-
necting to Gas Supply in log set ownerʼs
manual.
6. Carefully insert firebox into rough opening.
7. Attach firebox to wall studs using nails or
wood screws through holes in nailing flange
(see Figure 23).
8. Check all gas connections for leaks. See
Checking Gas Connections in log set ownerʼs
manual.
9. If using optional GA6090 brass trim kit, install
the trim after final finishing and/or painting of
wall. See instructions included with brass trim
accessory for attaching brass trim.
Nails or
Wood
Screws
Nailing
Flanges
105604-01H www.desatech.com 15