Specifications - Panasonic NA-F70G6 Operating & Installation Instructions Manual

Troubleshooting
Power failure/
The breaker has tripped.
Water outage
The "Stain Master" program
has no effect (Stains are not
removed).
Powder detergent remains
undissolved.
Operation stops in the
middle of wash or rinse
process.

Specifications

Model No.
Rated voltage
Rated frequency
Rated power consumption
Standard water amount
Maximum capacity
(Dry cloth)
Product dimensions
Product weight
Pressure of tap water
30
Symptoms
(continued)
Points to be checked
- Operation will resume from the point where it was
stopped when the power is recovered (Auto Restart).
- When water supply is recovered, remove the water
supply hose, release turbid water from the faucet,
and then start the washing machine.
- Pretreatments have been performed? (Hand
washing, applying stain remover, etc.)
- The amount of laundry is under 4.0 kg?
- The "Stain Master" program is selected according to
the type of stains?
- Put the detergent in the detergent/bleach inlet.
- Is the lamp flashing?
→
The pulsator occasionally stops to soak clothes
while the lamp keep flashing. This is not abnormal.
NA-F70G6
630 W
69 L
7.0 kg
595 mm (W) x 658 mm (D) x 1050 mm (H)
(P. 10)
NA-F60G6
220 - 240 V
50 Hz
590 W
66 L
6.0 kg
38 kg
0.01 - 1 MPa
(P. 17)
(P. 12)