Samsung Galaxy XCover FieldPro User Manual page 102

Settings
3. Enter information about the Wi-Fi network:
• Network name: Type the exact name of the network.
• Security: Select a security option from the list, and enter the password if
required.
• Auto reconnect: Choose this option if you want to automatically reconnect to
this network whenever you are in range.
• Show advanced options: Add any advanced options, such as IP and Proxy
settings.
4. Tap Connect.
Advanced Wi-Fi settings
You can configure connections to various types of Wi-Fi networks and hotspots,
manage saved networks and look up your device's network addresses.
1. From Settings, tap
2. Tap Advanced.
• Switch to mobile data: When enabled, your device will switch to mobile data
whenever the Wi-Fi connection is unstable. When the Wi-Fi signal is strong, it
switches back to Wi-Fi.
• Turn on Wi-Fi automatically: Turn on Wi-Fi in frequently-used locations.
• Wi-Fi power saving mode: Enable Wi-Fi traffic analysis to reduce battery
usage.
• Auto connect to AT&T Wi-Fi: Automatically connect to an AT&T Wi-Fi hotspot
when detected.
• Network notification: Receive notifications when open networks in range are
detected.
• Manage networks: View saved Wi-Fi networks and configure whether to auto
reconnect to or forget individual networks.
• Wi-Fi control history: View apps that have recently turned your Wi-Fi on
or off.
Connections > Wi-Fi, and then tap
91
to turn on Wi-Fi.