Download Print this page
Shure BRH50M Manual

Shure BRH50M Manual

Broadcast headset
Hide thumbs Also See for BRH50M:

Advertisement

Quick Links

SAFETY PRECAUTIONS
The possible results of incorrect use are marked by one of the two sym-
bols—"WARNING" and "CAUTION"—depending on the imminence of the
danger and the severity of the damage.
WARNING: Ignoring these warnings may cause severe injury or
death as a result of incorrect operation.
CAUTION: Ignoring these cautions may cause moderate injury
or property damage as a result of incorrect operation.
CAUTION
Never disassemble or modify the device, as failures may result.
Do not subject to extreme force and do not pull on the cable or failures
may result.
Keep the product dry and avoid exposure to extreme temperatures and
humidity.
WARNING
If water or other foreign objects enter the inside of the device, fire or
electric shock may result.
BRH50M Premium Dual-Sided Broadcast Headset
The BRH50M Broadcast Headset is developed especially for on-camera use
in broadcast and media production environments. Supra-aural design with
replaceable earpads provides long-wearing comfort and good isolation. The
dynamic, supercardioid microphone delivers natural, highly intelligible vocal
reproduction, and pivots 270 degrees for left or right side wear. A variety of
detachable cables enables connection to a wide range of devices for a lifetime
of use.
Features
Closed-back, supra-aural design with soft, replaceable earpads provides
long-wearing comfort and good isolation
Care and Maintenance
Clean using a soft, damp cloth.
Detachable Cable
©2017 Shure Incorporated
Do not attempt to modify this product. Doing so could result in personal
injury and/or product failure.
This device is able to produce sound volume higher than 85 dB SPL. Please
check your maximum allowed continuous noise exposure level based on
your national employment protection requirements.
WARNING
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMA-
NENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
Over exposure to excessive sound levels can damage your ears resulting in
permanent noise-induced hearing loss (NIHL). Please use the following
guidelines established by the Occupational Safety Health Administration
(OSHA) on maximum time exposure to sound pressure levels before hearing
damage occurs.
90 dB SPL
95 dB SPL
at 8 hours
at 4 hours
110 dB SPL
115 dB SPL
at ½ hour
at 15 minutes
Dynamic microphone delivers natural, highly intelligible vocal reproduction
with supercardioid polar pattern and frequency response optimized for
communication in loud environments
Ergonomic, ultra-lightweight design with split-frame adjustable, padded
headband for long wearing comfort
Rigid boom microphone pivots 270 degrees for left or right side wear
A variety of cables are available to connect to a wide range of devices
User-replaceable cable, earpads and windscreen provided for a long
product life
Legendary Shure durability to withstand the rigors of professional use
CAUTION: Do not use cleansers that contain solvents. Keep liquid and foreign
objects out of the driver openings.
BRH50M
Broadcast Headset
100 dB SPL
105 dB SPL
at 2 hours
at 1 hour
120 dB SPL
Avoid or damage may occur
1/7

Advertisement

loading

Summary of Contents for Shure BRH50M

  • Page 1 15 minutes Avoid or damage may occur BRH50M Premium Dual-Sided Broadcast Headset The BRH50M Broadcast Headset is developed especially for on-camera use • Dynamic microphone delivers natural, highly intelligible vocal reproduction in broadcast and media production environments. Supra-aural design with with supercardioid polar pattern and frequency response optimized for replaceable earpads provides long-wearing comfort and good isolation.
  • Page 2: Wearing The Headset

    BRH50M Broadcast Headset Shure Incorporated Pull on the knurled collar to disengage lock and remove cable. Attach the cable by aligning the arrows and pressing firmly into place until locked. Wearing the Headset The boom swivel allows the headset to be worn with the microphone on the left or the right side.
  • Page 3: Replacement Parts

    Replacement Parts Replacement windscreen for BRH50M BCAWS2 1 pair of replacement earcup pads for BRH50M BCAEC50 Replacement cable for BRH headset - terminates to BCASCA-NXLR3QI XLR3M and 1/4 in. Neutrik connectors (7.5 ft. length)
  • Page 4: Model Variations

    BRH Broadcast Cable Accessories The following tables describe wiring for BRH detachable cables. All BRH detachable cables contain six conductors with discrete termination at the Shure 6-pin connector that plugs into the headset. For pre-terminated cables, conductors (and signal) are tied to common contacts at the other end of the cable where shown.
  • Page 5: Specifications

    Dynamic, Neodymium magnet Maximum Input Power Polar Pattern 1000 mW Supercardioid Find More Information Online Frequency Response For more information, visit http://www.shure.com 40 to 16,000 Hz Output Impedance 250 Ω Sensitivity at 1 kHz, open circuit voltage −60.0 dBV/Pa* (1.0 mV)
  • Page 6: Limited Warranty

    PERMITTED UNDER APPLICABLE LAWS AND, TO THE EXTENT NOT At its sole option, Shure will repair or replace the defective product and PERMITTED, ARE HEREBY LIMITED TO THE DURATION AND TERMS promptly return it to you.
  • Page 7 75031 Eppingen, Germany IndonesiaService Center Resmi: Jakarta Hotline (021) 612 6388 Medan (061) 6612550 Surabaya (031) 5032219 Jogjakarta (0274) 371710 Denpasar (0361) 766788 Makasar (0411) 324652 Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com...

This manual is also suitable for:

Brh50m-lc