Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pyle WATCHDOG PLMCWD15
Summary of Contents for Pyle WATCHDOG PLMCWD15
- Page 1 Always on the watch...Even if you’re not! MOTORCYCLE ALARM MANUAL...
-
Page 3: Important Notice
TRANSMITTER ICONS IMPORTANT NOTICE Please have system installed by an authorized dealer. Protect this product and its transmitters from Button 1 Button 3 humidity and water. (PLMCWD25/75) Read manual carefully before installing and operating the unit. Replace battery when the transmitter's operating distance is shortened or its indicator lights dim noticeably. - Page 4 FUNCTIONS ARMING OPERATION turn signals will 3 times, to remind the driver To arm the system press transmitter button 1: to arm the system. The siren will chirp once. SILENT ARMING/DISARMING The parking lights will once.* The LED will rapidly then start slow- Press transmitter button 1 twice for silent opera- ly.
- Page 5 FUNCTIONS tion of system operations and status. * Optional feature After a function such as arming is selected, the LCD REMOTE ENGINE START (PLMCWD25/75) display will show confirming icons to indicate that Press button 3 twice, the engine will start and run the function has taken place.
- Page 6 FUNCTIONS sensitivity (level 8=most sensitive), which can be relay. Connect to the motorcycle turn signal wires. If adjusted using the remote transmitter. To adjust the the motorcycle’s turn signal circuit exceeds 10 system’s built-in shock sensor: Amps a relay is required. NOTE: Do not connect the YELLOW wire’s to the 1.
- Page 7 PLMCWD15/PLMCWD25/PLMCWD75 – INSTALLATION DIAGRAM...
-
Page 8: Ecu Installation
ECU INSTALLATION IGNITION DEFEAT WIRE DIAGRAM Please mount +12V IGNITION (MOTOR SIDE) the ECU down- side as shown TO GREY IGNITION in the figure. DEFEAT WIRE ON ECU +12V IGNITION (KEY SIDE) LED INSTALLATION SIREN INSTALLATION Mount the siren downward as shown in figures 1 or 2 below. -
Page 9: Troubleshooting
TROUBLESHOOTING 1). Transmitter is ineffective or the control dis- tance decreased significantly. Tall building, radio tower or high frequency electromagnetic wave may affect the control range. Low power of the battery. The transmitter is broken or damaged. The installation location of the antenna is wrong. - Page 10 NOTES...
- Page 11 Always on the watch...Even if you’re not!
- Page 12 www.pyleaudio.com...