GE Mabe MCL2040PSBB Use And Care Manual page 56

24
Performance
(washer)
Clothes too wet
Colored spots
Grayed or
yellowed clothes
Lint or residue
on clothes
Possible causes
Incorrect spin
cycle selected
Incorrect use of
fabric softener
Dye transfer
of detergent
Hard water
Water is not
hot enough
Washer is
overloaded
Detergent is
not dissolving
Dye transfer
Clothes are air
or line dried
Incorrect sorting
Washing too long
Detergent not
dissolving
Overloading
Incorrect use of
fabric softener
What to do
Make sure the spin cycle selected matches
the load you are washing. Some fabrics will
feel wetter when rinsed with cold water.
Check fabric softener
instructions and follow directions for using
dispenser.
Pretreat stains an rewash.
Separate whites or lightly colored items
from dark colors.
Use more detergent (especially with larger
loads). Be sure to follow detergent
manufacturer's directions.
Use a water conditioner like Calgon brand
or install a water softener.
Make sure water heater is delivering water
at120°F - 140°F (48°C - 60°C).
Select load size based on the laundry load.
water before loading clothes.
Sort clothes by color. If fabric label states
wash separately, unstable dyes may be
indicated.
If you do not dry your clothes with a
clothes dryer, your clothes may retain
more lint.
Separate lint producers
collectors.
Wash small loads for a shorter time than
larger loads.
water, before loading clothes.
Try a liquid detergent.
Use warmer water temperature.
Load clothes loosely, no higher than the
top row of holes in the washer basket.
Check fabric softener
instructions and follow directions for using
dispenser.
package for
from linto
package for