Voltage Selection; Before First Use - Aroma AWK-080MV Instruction Manual

Voltage Selection

1. Before plugging into an alternating current (AC)
wall outlet, ensure the appropriate voltage is
selected on the base of the Electric Travel Kettle.
2. Using a flat headed screwdriver, turn the black
selector switch to choose the appropriate
voltage.
3a. To select 120 AC voltage: turn the black Voltage
Selector clockwise to "100-120V."
3b. To select 220 AC voltage: turn the Voltage
Selector counterclockwise to "AC220-240V."
NOTE: ensure that the appropriate adapter (not
supplied) is utilized when using a 220 AC circuit.
AC220-240V
Turn selector to appropriate voltage

Before First Use

1. Read all instructions and important safeguards.
2. Remove all packing materials and make sure that
the product has been received in good condition.
3. Take care to keep the electrical components on the
exterior of the kettle dry, wipe out the interior of the
kettle with a damp cloth. If your hand will not fit
inside the kettle, swish warm, soapy water around
in the interior of the kettle with the lid closed.
4. Rinse out the inside of the kettle thoroughly with water.
5. With a damp cloth, gently wipe off the exterior of
the kettle. Do not wipe off electrical components
as this may cause damage to the unit.
6. Dry all parts completely.
7. Determine if 220V AC or 120V AC supply will be
used to select appropriate voltage.
8. It is recommended to run your kettle through one
boiling cycle before using it to consume beverages.
Following the instructions in To Heat/Boil Water
on page 8, boil one kettle of water. When water
has boiled, pour it out and rinse the inside of the
kettle once more. The kettle is now ready for use.
6.
100-120V
Select
Caution:
Before plugging unit
into the wall outlet,
ensure that the Voltage
Selector located on the
bottom of the unit is set
to the corresponding
voltage that will be
supplied to the kettle.
Always unplug the
kettle and allow it to
cool completely before
cleaning.
Note:
· Never attempt to
disassemble the kettle.
· Never immerse the
kettle, power cord or
plug in water.
· Always take care not
to allow electrical
components to come
into contact with water.
· Do not use abrasive
cleaners or scouring
pads of any kind on the
kettle. This will cause
damage to the finish
and may create a risk of
electrical shock.
· Any other servicing
should be performed by
Aroma® Housewares.