Assembly Instructions; General Components & Features; Additional Requirements; Step 1 Attach Emitter Screen - Endless Summer 62301 Owner's Manual

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.

Assembly Instructions

General Components & Features
Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 18
for specifications.
Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged,
contact 1-800-762-1142 for assistance.
Note: All hardware is mounted on a cardboard pack and numbered to match their assembly step.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to
assemble without proper tools.
(1) - 7/16" Wrench
(1) - #2 Phillips Head Screwdriver
(1) - Leak Detection Solution (Instructions on how to make solution are included in Step 6)
(1) - 20 lb.(4-5 gallon) precision filled LP Gas Grill Cylinder
Note: You must follow all steps to properly assemble heater.
Step 1 – Attach Emitter Screen
Line up 4 holes on bottom of Emitter Screen with corresponding holes in
Emitter Bottom, and insert (4) Medium Screws in holes until tight.
Qty 4
Owner's manual: model 62301 portable outdoor heater 6/6/03 6