Page 1
To obtain a copy, call, write to the address below, or visit our website. JACKSON TOOL • P. O. BOX 5701 • GREENVILLE, SC 29606 877-522-8995 or 864-721-4235 • FAX 864-721-4236 • www.jacksontoolinc.com...
CAUTION and the roll pin is in place. DANGER WARNING ONLY use Jackson Tool replacement parts on the Pipe Stand. Use of parts DANGER CAUTION not supplied by Jackson Tool WILL NOT work properly on the Pipe Stand and could result in serious personal injury or death.
2,500 lb. working Powder coat load capacity finish Base legs made from 1" square tubing SPECIFICATIONS Model No. 436DL Pipe Size Capacity 1/2" to 12" Max. Weight Capacity 2500 lbs. per Stand Overall Dimensions ⁄ L 24" W 20 " H 32" (fully retracted) Min.
OPERATING INSTRUCTIONS 1. Inspect the Pipe Stand before each use. NEVER use if any legs or other part of the stand is bent, deformed, broken or has been modified. 2. Place the Pipe Stand on a smooth, level, firm surface that will support the weight of the load. Be sure all feet of the stand make contact with the floor.
DANGER OPTIONAL HOLD DOWN DEVICE 436DL-200 OPERATING INSTRUCTIONS WARNING Hold down device is only to secure pipe to the Pipe Stand. DO NOT use for any other purpose. CAUTION 1. Place the hold down device on top of the pipe, in line with the center of the pipe stand base (See photo 1).
Page 8
OPTIONAL HOLD DOWN DEVICE #436 DL-200 OPERATING INSTRUCTIONS – CONTINUED 5. Turn hold down device handle/nut to tighten chain. As you tighten the chain with the handle/nut, check to ensure that the full length of the chain tightens against the pipe. (See photo 5).
HOLD DOWN DEVICE #436DL – 200 EXPLODED VIEW AND PARTS LIST ITEM# PART# DESCRIPTION 1 ....636-7 ....1 ....Handle/Nut 2 ....636-858 ....1 ....Hold Down Bracket 3 ....436DL-201 ....1 ....Acme Screw/Chain Assembly...