Maintenance & Troubleshooting; Cleaning; Service Parts / Parts Subject To Wear; Changing The Printer Paper - Bosch BAT 131 Original Instructions Manual

6. Maintenance & Trouble-
shooting
6.�

Cleaning

The housing and the display of the BAT 131 may only be
cleaned using soft cloths and neutral cleaning agents.
Do not use any abrasive cleaners or coarse workshop
cleaning rags.
6.2

Service Parts / Parts Subject to Wear

Designation
Connecting cable with terminals for the
battery
<)
Printer paper (1 roll)
<)
(Minimum order 5 rolls)
wearing part
<)
Robert Bosch GmbH
Maintenance & Troubleshooting � B�T ��� � ��
6.�
i
The integrated printer only uses thermal paper in a
roll with the dimensions 57 mm x 25.9 mm.
1. Unlock the printer door gently but firmly lifting up on
the release lever.
2. Remove the empty paper roll hub.
Ordering number
1 684 465 625
1 681 420 028
Fig. 3:
1 Paper Compartment
2 Paper Sensor
3 Release Lever
3. Place a new roll of paper in the compartment.
4. Pull the paper forward so that it extends past the
serrated edge of the paper slot.
Fig. 4:
5. Close the door and make sure the lever locks securely.

Changing the Printer Paper

Printer view
Paper feeds from underneath the roll
1 689 989 132
B�T ��� � �� � �� en
|
2011-09-09