Advertisement
Assembly
2. Assemble base, sides and rear panel of zero clearance box
Lie the base panel on the floor and using the screws provided in the assembly pack, screw the side
panels to the base and then attach the rear panel.
3. Attach full spigot assembly and top panel
Drill out the two 3.3 mm holes in the spigot where the two dimples are located. Screw the full spigot
assembly to the back panel of the zero clearance box (though the back of box) and attach the top panel.
Rinnai New Zealand Ltd.
Rinnai Australia Pty. Ltd.
0800 746 624
1300 555 545
3
RIB2310/RIB2311 Sapphire/Neo Zero Clearance Box Assembly
11955-F 06-14
Advertisement
