Congratulations on your purchase of this Uniden DSS2405 optional handset and charger. This additional handset is for use with the Uniden DSS2415, DSS2455, or DSS2465 base. You can place a fully featured cordless handset anywhere in your home where AC power is available to connect the handset charging cradle.
Installation & Safety Choosing the best location for your phone. When choosing a location for your phone there are a number of appliances the phone should not be near, and areas you should avoid. AVOID - Television sets and other electronic appliances CHOOSE - a central location...
Connect the Charger Connect the AC adapter to the DC IN 9V jack and to a standard AC wall outlet. Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. Make sure the charge LED illuminates.
Securely close the battery compartment cover by sliding it until it snaps into place. “Please Register” appears in the display. The DSS2405 will only work with “AA” Ni-MH rechargeable batteries. If you use any other type of batteries, the display will show “Use rechargeable battery only”.
Cleaning the battery charging contacts To maintain a good charge, it is important to clean the charging contacts on both the handset and the charger once a month. Use a dry cloth or pencil eraser to clean. Register the Handset YOU NEED TO REGISTER THE DSS2405 TO THE MAIN BASE BEFORE USE! DSS2415...
Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited ELEMENT OF WARRANTY : Uniden warrants to the original retail owner for the duration of this warranty, its DSS2405 (herein after referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.