Table of Contents
Advertisement
Please note :
• Most instructions in this manual refer to Remote Control use.
• This unit will automatically turn On the Screen Saver after 5 minutes of inactivity and into the Standby mode after 25
minutes of inactivity.
Playback
Before:
Turn On the TV, Amplifier and any other Device(s) which are
connected to this unit. Make sure the TV and Audio Receiver
(not included) are set to the correct Channel/Input.
(
on page 12
1
Press [ y ] to turn on this unit.
2 Press [ A ] and insert a disc with label
facing up.
3 Press [ B ] to start playback.
4 Press [ C ] to stop playback.
Disc Menu
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / 0 / 1] to select an item, then press [OK],
[ B ] (on the unit).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the Disc menu.
• Press [TOP MENU] to call up the Title menu.
Note(s):
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume Playback
Press [ C ] during Playback. PRE STOP icon
will appear at the top-left on the TV screen.
Press [ B ]. RESUME icon will appear at the
top-left on the TV screen and Playback will
Resume from the Point where Playback was
Stopped.
Note(s):
• To Cancel Resume, press [ C ] one more time in the Stop
mode.
• The Resume Playback information stays in unit Memory
even when the Power is turned Off, as long as the Disc
stays in the unit.
Pause and Step-by-Step Playback
Press [ F ] during playback.
To continue Playback, press [ B ].
The disc goes forward by one Frame each time [ F ] (on the
remote control) is pressed in the Pause mode.
To continue Playback, press [ B ].
EN
DVD FUNCTIONS
)
2
2
1
3
4
PRE STOP
Note(s):
• When you Play back a DVD or CD-R/-RW with JPEG Files,
refer to details on page 12.
• "
This operation is not available." may appear at the Top-
left on the TV Screen when the operation is prohibited by
the disc or this unit.
• Some DVD may Start Playback from title 2 or 3 due to
specific programs.
• During the Playback of a 2-layered disc, pictures may Stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is Not a Malfunction.
• You can change the On-screen language in "Menu"
setting. (Refer to page 18.)
Fast Forward / Reverse Search
Use [ g ] or [ h ] Repeatedly during
Playback to select the required Forward or
Reverse Speed.
To continue Playback, press [ B ].
Note(s):
• Fast Forward or Reverse Search speed is different depending
on the disc. Approximate speed is ×2, ×4, ×8 and ×20.
Slow Forward Search
Press [ g ] Repeatedly in the Pause mode
to select the required Forward speed.
To continue Playback, press [ B ].
Note(s):
• Slow Forward speed is different depending on the disc.
Approximate speed is ×1/2, ×1/4 and ×1/8.
Zoom
1) Press [ZOOM] Repeatedly during
Playback
to select the required Zoom factor:
×1.5, ×2 or ×2.5.
2) Use [K / L / 0 / 1] to Slide the Zoomed Picture across the
TV Screen.
3) To Exit the Zoom function, press [ZOOM] Repeatedly to
select "ZOOM 1"(Off).
Note(s):
• Zooming function does not work while the Disc Menu is
displayed.
• Some Part of the Picture may not be Zoomed depending
on the Disc or Playback status.
– 11 –
Lights up when power is On.
2
1
X2
SF 1/2
ZOOM 2
Advertisement
Table of Contents
