Page 1
VSUB-1T VSUB-1R VSUB-1 Digital Wireless Subwoofer Audio System...
Page 3
Emotiva VSUB-1 The Emotiva VSUB-1 is used to connect from one to four subwoofers to the subwoofer output of a home theater receiver or processor. To use the VSUB-1 wireless subwoofer system, a VSUB-1T transmitter is connected to the subwoofer output on your processor or AVR, and a VSUB-1R receiver is connected to the input on each of your subwoofers.
Page 4
VSUB-1 Transmitter and Receiver puter POWER PAIR LINE INPUT VSUB-1T 1. Pairing Button (transmitter) - Press this button to pair your VSUB-1T transmitter to a VSUB-1R receiver (see Pairing). 2. Line Input (transmitter) - Connect this to the subwoofer output on your processor or AVR.
VSUB-1 Connections PROCESSOR or AVR SUBWOOFER OUTPUT TRANSMITTER POWER PAIR LINE INPUT VSUB-1T RECEIVER POWER PAIR LINE OUTPUT VSUB-1R INPUT SUBWOOFER...
Page 6
Pairing - Before using the VSUB-1 system, you must pair your receiver with your transmitter. With both units powered on, press and hold the Pairing button on the VSUB-1T transmitter for several seconds until the Power LED starts blinking.
Page 7
FCC warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.