Basic Configuration; Quick Reference In Cd-Rom Guide - Planet Networking & Communication ICF-1600 Quick Installation Manual

Basic Configuration

A. LCD configuration access
1. Press 【 MENU 】 to enter or exit configuration menu.
2. Go to 『 Settings
configuration.
3. Please configure the phone based on your network configuration: Static or DHCP.
4. Go to 『 LAN Configuration
Select to chose the network configuration.
5. Go to 『 IP Address (Static)
address, then press Save to save changes.
B. Web configuration access
The video phone provides GUI (Web based, Graphical User Interface) for machine
management and administration.
The default IP address of video phone is 192.168.0.1. You may now open your
web browser, and insert http://192.168.0.1 in the address bar of your web
browser to logon video phone web configuration page.
Video phone will prompt for logon username/password, please enter: root / null
(without password) to continue machine administration.
In order to connect machine for administration, please locate your
PC in the same network segment (192.168.0.x) of video phone. If
you're not familiar with TCP/IP, please refer to related chapter on
user's manual CD or consult your network administrator for proper
Note
network configurations.

Quick reference in CD-ROM guide

This guide is used to help you startup your Internet Video Conferencing Phone
settings. It is also recommended to check the user manual CD-ROM for more
details like the "LCD menu", "Web Setup", and how to set the device back to
default value.
』‡『 Device Configuration
』‡『 IP Address (Static) / DHCP
』 and press up / down key to configure the IP
』 to configure the network
』 and press
1-